This article will show you how to activate the HP 15 series Notebook boot option to install Windows 10 from a USB Bootable Drive. You can purchase a new replacement HP laptop with windows ten or free dos pre-installed. However, if you want to install Windows 10 or Linux from a USB Bootable Drive, you will need to enable the boot option within bios. You will need a USB flash drive or another media to install the OS on your laptop.
You must backup your data before installing an OS replacement on your Laptop. Otherwise, you can install OS only on your C: drive. To avoid data loss, don’t touch any other movements during the installation. We are available to help you with any problems or provide additional articles on a related topic.
How to Install Windows 11 on hp laptop FROM USB
So let’s begin and follow the simple steps mentioned below.
How to Enable Boot Option in HP 15 Notebook:
Step 1 First, Switch on Your Laptop.
Step 2 Now, press quickly the F9 Click here to open the Booting Menu.
Step 3: You’ll notice that there is no option to boot from a USB drive or DVD drive in the boot menu. Now we need to enable boot options.
Step 4 Click the F10 button to attend Bios setup
Step 5: System Configuration is located in the bios. Next, listen to boot options before hitting enter.
Step 6: Here you will find legacy support for the disabled.
Step 7:This can be enabled Enter Then press Yes. Next, press Yes.
Step 8: Here we are done. We are done.Remove your Windows 10 bootable USB stick.
Step 9 Then, insert it into your Laptop. Next, press the F10 Click here Save lots of bios settings And hit enter.
Step 10 Press the F9 button quickly to confirm our bios settings. Enter the numbers on your display and hit enter
Step 11 All options for boot are now available
Step 12 Next, choose your USB Drive.
Step 13 Installing from the USB drive is the final step. Here it is. You can continue reading Installing Windows from here.